RRR

RÖNTGEN RRR flexback carbon band saw blades have a pin-point carbide structure of 30 – 50 grains per µm². The presence of hard iron carbides produces outstanding tooth edge wear resistance, together with high flex strength in the backing steel material.

Area of application

plates
solid material, round
angles, small

Teeth per inch

Hook tooth

  2 3 4 6 8 10 14 18 24  
6 x 0.65                 1/4 x .025
8 x 0.65               5/16 x .025
10 x 0.65             3/8 x .025
13 x 0.65               1/2 x .025
16 x 0.80               5/8 x .032
20 x 0.80                 3/4 x .032
25 x 0.90             1 x .035
Width x Thickness (mm)Width x Thickness (inch)

Hook tooth

The hook tooth has a positive cutting angle of 10°. This tooth form is particularly well suited for solid, thick-walled tubes and all higher-grade alloy material.

Normal tooth

  2 3 4 6 8 10 14 18 24  
6 x 0.65       1/4 x .025
8 x 0.65       5/16 x .025
10 x 0.65       3/8 x .025
13 x 0.65       1/2 x .025
16 x 0.80         5/8 x .032
20 x 0.80         3/4 x .032
25 x 0.90           1 x .035
Width x Thickness (mm)Width x Thickness (inch)

Normal tooth

The normal tooth has a cutting angle of 0°. It is suitable for material with a high carbon content (such as cast iron), for material with small cross sections and for thin-wall profiles and tubes.